- Ready to use PU foam in a 750ml can.
- Fire resistant in a joint (EN 1366-4).
- High filling capacity.
- Good adhesion on all surfaces (except PE, PP and PTFE).
- High insulation value, thermal and acoustic.
- Very good bonding properties.
- Gas- and flame proof up to 240 minutes in a joint.
- Water resistant (not watertight).
- Not UV-resistant.
- 12 months shelf life.
Description:
A fire rated one component, expanding polyurethane foam filler. Rapid curing. Excellent thermal and acoustic insulation properties. Expands 35-40 times its initial volume. Excellent primerless adhesion on most construction materials. Soudafoam FR is a PU-foam with fire retardant characteristics according to the European standard EN 1366-4. 12 months shelf life unopened and stored in dry and cool conditions (Between 5 and 25 °C), Upright storage is recommended.
Technical data:
- Basis Polyurethane
- Consistency Stable foam, thixotropic
- Curing system Moisture-cure
- Skin Formation (FEICA TM 1014) 9,5 min
- Cutting Time (FEICA TM 1005) 90 min
- Density** Ca. 25 kg/m3
- Sound insulation (EN ISO 717-1) 62 dB
- Thermal conductivity () (EN 12667) 0,034 W/m.K
- Box Yield (FEICA TM 1003) 750 ml yields ca. 30 l of foam
- Joint Yield (FEICA TM 1002) 750 ml yields ca. 17 m of foam
- Shrinkage after curing (FEICA TM 1004) < 6 %
- Expansion after curing (FEICA TM 1004) < 1 %
- Expansion during curing (FEICA TM 1010) Ca. 86 %
- Compressive strength (FEICA TM 1011) Ca. 104 kPa
- Shear strength (FEICA TM 1012) Ca. 43 kPa
- Temperature resistance** -40 °C till +90 °C (cured)
Available as a box of 12 x 750ml canisters.
Application:
Installation of fireproof doors and windows. Sealing of fire retardant joints in walls and ceiling. As part of the Soudal Fire Range assortment for penetration seals and joints.Sealing of all openings in roof constructions.
- Apply of an acoustic baffle.
- All foam applications in static joints.
Application method:
Shake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. For non-conventional substrates a preliminary adhesion test is recommended. Remove pressure from the applicator to stop. Fill holes and cavities for 1/3, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam-cleaner or acetone. Prior to using the Gun & Foam-cleaner, test whether surfaces are affected or not. Especially plastics and lacquer or paint layers can be sensitive to this. Cured foam can only be removed mechanically or with Soudal PU-Remover.
Can temperature: +5 °C - 30 °C
Ambient temperature: +5 °C - 30 °C.
Surface temperature: +5 °C - 35 °C
Standards and certificates:
European Technical Approval Soudafoam FR - ETA 13/0280
CE-marked (BCCA - EC conformity CPR)
Joint Sound Reduction Test by IFT
Various test and classification reports in various accredited testing institutes: IFT Rosenheim, ITB Poland, Warrington Fire Gent, Warrington Fire Australia, Efectis Netherlands, Efectis France, CSTB France, CSI Italy.
