Quick Overview
- 30 & 60 minute fire tested to BS-EN 1634-1 & BS476-22.
- Tested in full size single & double door-sets, not linear gaps.
- No additional mastics or sealants required.
- Acoustically tested to full door-set up to 43dB.
- Tested in both metal and timber stud partitioning.
- Tested in a retro-fit scenario to allow use for rectification.
- Tested with gaps between 7mm & 30mm.
- Available singularly or in box of 12.
Product Description
High quality PU foam recommended for sealing applications where fire resistance is required.
Blue 60 is a specially formulated expanding foam that must be used in conjunction with Blue 60 fire rated packers that gives up to 60 minutes fire protection to timber door-sets without the use of additional mastics or sealants.
Blue 60 PU Foam is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to the ozone layer.
It has a fire rating of up to 60 minutes in Timber Door-sets configuration.
Properties
- According to EN 1634/1 & BS476 PT:22 fire retardant up to 60 mins – see table enclosed.
- Efficient seal against smoke and gas.
- Does not contain CFC’s and H-CFC’s.
- Excellent adhesion & filling capacity.
- Excellent mounting capacity and stability.
- High yield up to 45 litres depending on temperature and humidity.
- Excellent adhesion on most substrates (except Teflon, PE and PP).
- High filling capacity.
- High thermal & acoustical insulation value.
- After cured, it can be painted, cut , trimmed.
- No shrinkage.
- Mould and water resistant.
- Temperature resistance -40°C to +90°C.
Technical Properties
- Base Polyurethane prepolymer
- Curing System Moisture.
- Skin Formation Approx. 10 minutes.
- Specific gravity 23+ kg/m3.
- Temperature resistance -40°C until +90°C (cured).
- Fire properties BI (DIN 4102).
Performance
30 Minute Timber Doorset
Product Code Description Size
AFBLUE60/GG Blue 60 Fire Rated Frame Foam GUN GRADE 750ml
AFBLUE60/1MM Blue 60 Packer 1mm (Green) 1mm
AFBLUE60/3MM Blue 60 Packer 3mm (White) 3mm
AFBLUE60/5MM Blue 60 Packer 5mm (Blue) 5mm
Maintenance
All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 – Code of Practice for the Installation and Inspection of Fire Stopping.
Competency
It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.
NOTE: Packer must be used with this product.
