Astro-Flame Astro Batt 1200mm x 600mm x 50mm or 60mm Thickness CE Marked

Tax included.
Quick Overview
  • Fire Resistant Board for sealing service penetrations in walls or floors.
  • CE Marked and UL-EU Accreditation.
  • Fire Resistant testing to EN 1366-3 : 2009 and BS 476 Part 20 : 1987.
  • Fire Classification to EN 13501-2.
  • Air Permeability testing to EN 1026.
  • Acoustic Isolation testing to EN 10140.
  • Suitable for indoor use without additional environmental protection.
  • Astro Batt is coated both sides - all raw edges need to be coated with Astro Coa.

Product Description

CE Label Astro PFP FR Coating Product

Specifically designed for sealing around service penetrations in walls and floors, a single Astroflame board (50mm or 60mm thick) can provide high levels of fire integrity and insulation.

Tested in Block Wall, Concrete, Masonry, Plasterboard Partition and tested in Concrete Floors.

Offering up to 4 hours fire resistance in accordance with BS476: Part 20: 1987 and EN 1366-3 : 2009. Up to Rw 60dB sound reduction please refer to the Astroflame technical department.

Astroflame Boards consist of a stone fibre core coated on both sides with Astro Coat which transforms during a fire to prevent the passage of fire and smoke and the transfer of heat.

Astro Batt cut edges or joints should be coated with Astro coat or Astro mastic.

*For specific details please refer to the test certification.

Please note specific fire, acoustic & EI Ratings will vary depending on the thickness of batt used and the configuration, please contact us for confirmation.

Properties & Specification

  • 50mm Thickness Batt
  • Dimensions 1200mm x 600mm x 50mm
  • Stone Fibre Density 140Kg/m³
  • Coating Thickness 1mm Nominal, 2.2kg wet film coating
  • Fire Resistance/Insulation 4 hours - BS476 pt20/22; EN 1366-3, EI 120 & EN 13501-2
  • Acoustic Performance Acoustic Reduction up to 60dB please refer to the Astroflame technical department
  • Air Permeability 600Pa EN 1026 - 100Pa 1.8/1.4 m3/h/m2

All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 – Code of Practice for the Installation and Inspection of Fire Stopping.

It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.